DN50 Lamella plate tube settler for lamella clarifier

DN50 Lamella plate tube settler for lamella clarifier is very suitable in all different clarifiers and removing sand. It is regarded as universal water treatment equipment in water supply and drainage engineering. It has wide application, high handling efficiency, small area, etc. It is suitable in removing sand in inlet, industry and drinking water precipitation, separation in oil & water.
The modular and cubical self-supporting settler design of Honeycombed Inclined Tube Settlers aids handling during installation and any subsequent maintenance.
DN50 Lamella plate tube settler for lamella clarifier design avoids thin wall membranes and utilizes forming techniques to minimize component stress and subsequent environmental stress cracking fatigue.
DN50 Lamella plate tube settler for lamella clarifier offers an inexpensive method of upgrading existing water treatment plant clarifiers and sedimentation basins to improve performance. They can also reduce the tankage/footprint required in new installations or improve the performance of existing settling basins by reducing the solids loading on downstream filters.

Main Features of DN50 Lamella plate tube settler for lamella clarifier

♦  Large wetted perimeter, hydraulic radius is small.

♦  The laminar good condition, particles falling from flocculent flow interference.
♦  When the tube for 1 m long, effective load by 5 tons/square meter design.And V control in 2.5- 3.0 mm/SEC effluent water,within the scope of the best.
♦  In the water inlet place inclined pipe length, the honeycomb 2.0-3.0 meters, may in the 50-100 kg/m3 clay sand content of high turbidity safe operation of processing.
♦  The plastic inclined packing, which the processing ability is to destabilize the flat streaming traps three to five times, accelerate the clear pool and pulse clarify pool two to three times.
♦  The material is with UV radiation protection.

Technical Parameters of DN50 Lamella plate tube settler for lamella clarifier